Raynor AlumaView Series
AlumaView™ garage doors have long been the standard fixture for facilities that require dependable, attractive doors that offer maximum visibility. With an anodized-finished extruded aluminum frame, AlumaView garage door sections are a full 1-3/4" or 2" thick.
AlumaView Optima
Designed for peak performance and strength, this 2" thick garage door is available in larger sizes and features bold rail construction for maximum durability, reliability and beauty.
| Type | Commercial Sectional Garage Doors | |
| Model | AlumaView OPTIMA | |
| Size | 24’ x 24’ Max | |
| Operation | Manual, Motor or Hand Chain | |
| Construction | Rail & Stile - minimum .05"; 5/16" diameter screws | |
| Material | Aluminum | |
| Surface Texture | Smooth | |
| Section Joint | Tongue-Groove | |
| Section Thickness | 2" | |
| Gauge | N/A | |
| Stiles | Extruded aluminum - minimum .05" | |
| Insulation | N/A | |
| Seals | Bottom Seal (3", 4" Gray; 3" Yellow; or 3" Black EPDM), Optional Header Seal | |
| Trussing | Windload: 20 P.S.F.(88 m.p.h.) (standard); Material: U-bar (18-Gauge or 20-Gauge);Sizes: 4", 6", or 8" | |
| Panel Configuration | NA | |
| Color | Clear Anodized or Optional ArmorBrite Powder-Coat 187 custom colors available, or Bronze Anodized, Black Anodized | |
| Windows | 1/8" DSB Glass; 1/8" 1/4" 3/16" Clear Tempered Glass; 1/8" 1/4" Tinted or Tinted Tempered Glass; 3/16" 1/4" Clear Glass; 1/4" Clear Laminated Glass; 1/4" Clear Wire Glass; 1/2" Insulated DSB Glass | |
| Type | Normal Headroom, Rear Mount Low Headroom, Front Mount Low Headroom, Lift Clearance, Vertical Lift, Incline, Contour | |
| Finish | Galvanized or Optional White Powdercoat | |
| Size | 2" or 3" | |
| Gauge | 12, 13, 16-gauge | |
| Type | Torsion Spring, Tandem Shaft Torsion Spring, or Weight Counter-Balance | |
| Springs | Spring Inner Diameter: 2-1/4", 3-1/2" or 5-1/2"; Duplex or High Cycle (30K, 50K, 100K); Optional Black Powdercoat | |
| Shafts | Tube or Solid (D-Shaft, 1" Keyed, 1-1/4" Keyed) | |
| Hinges | 11, 13, 14-Gauge or Hybrid | |
| Rollers | Standard (2" or 3") or Heavy Duty (2" or 3") | |
| Finish | Galvanized or Optional White Powdercoat | |
| Lock | Interior Slide Lock or Exterior Lock Bars | |
| Seal | Jamb Seal | |
| Hanger Angle | 11, 13-Gauge Galvanized or 13-Gauge White Powdercoated | |
| Pedestrian Door | 32" Wide x 3 Sections High | |
| Optional Wind Loading | NA | |
| Posts | Swing-Up or Carry-Away | |
| Section Warranty | 1-Year | |
| Hardware Warranty | 1-Year | |
| Spring Warranty | 1-year or Cycle Life | |
AlumaView Standard
This benchmark product provides Raynor reliability and durability to meet or exceed the requirements of daily use. With 1-3/4" thick door sections and streamlined rail construction, this garage door is engineered for lasting beauty and durability.
| Type | Commercial Sectional Garage Doors | |
| Model | AlumaView STANDARD | |
| Size | 14’ x 14’ Max | |
| Operation | Manual, Motor or Hand Chain | |
| Construction | Rail & Stile - minimum .05", 5/16" diameter screws | |
| Material | Aluminum | |
| Surface Texture | Smooth | |
| Section Joint | Ship Lap | |
| Section Thickness | 1-3/4" | |
| Gauge | N/A | |
| Stiles | Extruded aluminum - minimum .05" | |
| Insulation | N/A | |
| Seals | Bottom Seal (3", 4" Gray; 3" Yellow; or 3" Black EPDM), Optional EPDM Header Seal | |
| Trussing | Material: Optional U-bar (18-Gauge or 20-Gauge - can have up to 1 U-bar per door) | |
| Panel Configuration | NA | |
| Color | Clear Anodized or Optional ArmorBrite Powder-Coat-187 custom colors or Bronze Anodized, Black Anodized | |
| Windows | 1/8" DSB Glass; 1/8" 1/4" 3/16" Clear Tempered Glass; 1/8" 1/4" Tinted or Tinted Tempered Glass; 3/16" 1/4" Clear Glass; 1/4" Clear Laminated Glass; 1/4" Clear Wire Glass; 1/2" Insulated DSB Glass | |
| Type | Normal Headroom, Rear Mount Low Headroom, Front Mount Low Headroom, Lift Clearance, Vertical Lift, Incline, Contour | |
| Finish | Galvanized or Optional White Powdercoat | |
| Size | 2" or 3" | |
| Gauge | 12, 13, 16-gauge | |
| Type | Torsion Spring, Tandem Shaft Torsion Spring, or Weight Counter-Balance | |
| Springs | Spring Inner Diameter: 2-1/4", 3-1/2" or 5-1/2"; Duplex or High Cycle (30K, 50K, 100K); Optional Black Powdercoat | |
| Shafts | Tube (13 gauge) or Solid (D-Shaft, 1" Keyed) | |
| Hinges | 11, 13, 14-Gauge or Hybrid | |
| Rollers | Standard (2" or 3") or Heavy Duty (2" or 3") | |
| Finish | Galvanized or Optional White Powdercoat | |
| Lock | Interior Slide Lock or Exterior Lock Bars | |
| Seal | Jamb Seal | |
| Hanger Angle | 11, 13-Gauge Galvanized or 13-Gauge White Powdercoated | |
| Pedestrian Door | 32" Wide x 3 Sections High | |
| Optional Wind Loading | NA | |
| Posts | N/A | |
| Section Warranty | 1-Year | |
| Hardware Warranty | 1-year | |
| Spring Warranty | 1-year or Cycle Life | |
Home | Residential | Commercial | Service | Maintenance Tips | Safety Info | Gallery | Promotions | FAQ | Contact Us | Sitemap